Kaba 1460 - Page 19

User manual Commissioning
Kaba programmer 1460 k1evo809en-2014-04 19
5.3.8 Entering a name
5.3.9 Info
Various information regarding the Programmer can be
looked up in this menu:
5.3.10Switching off the Programmer
1. Open the Programmer settings menu. (See
Chapter 5.3.)
2. Select the Name submenu and confirm using
the ENTER key.
Note: You can switch between lower case and
upper case characters (a/A) using the right
menu key.
Delete the previous entry using the left menu
key (x).
3. Enter the name using the alphanumeric keys
and confirm using the ENTER key (max. 28
characters).
The new name appears on the display when
starting the Programmer.
•Software Version
•Checksum
• Hardware Version.
1. Press the on/off key.
To switch off, confirm the process using the
menu key (yes). The switching off process can
be cancelled using the menu key (no).