Kaba 1460 - Importing from Actuators

Programming User manual
34 k1evo809en-2014-04 Kaba programmer 1460
6.2.1 Updating of actuators
6.3 Importing from actuators
In the case of import, the Programmer reads the con-
figuration data from the actuators.
There are 4 different data types available for selection
in the Import menu.
• Info: In this menu, the status data of the
actuator can be checked. (See Chapter 6.3.1)
• Traceback: Only information from the
Traceback is imported.
• Configuration: All configuration data is
imported (without Traceback data).
• Diagnostic data: Creates a ZIP file with the
memory content of the actuator. Auxiliary
agent for problem solution in support
cases. (See Chapter 6.3.2)
1. Press Export menu key.
2. Log in to the actuator using Programming
master.
3. Select Next to export all data to the actuator.
The configuration of the actuator is updated
and confirmed.
For actuators with LEGIC advant or LEGIC
prime, you must log in using the authorised
programming master.