Kaba 1460 - Firmware Updates

Commissioning User manual
24 k1evo809en-2014-04 Kaba programmer 1460
5.5.3 Memory info
5.5.4 Deleting everything
5.6 EAC Service Tool - updating firmware
The EAC Service Tool is an auxiliary programme for up-
dating firmware data and for diagnoses.
The firmware data can be downloaded onto the Pro-
grammer using the EAC Service Tool.
Data transfer from the auxiliary programme is set out
in the Kaba EAC Service Tool user manual, document
no. k1evo817.
1. Open the data settings menu.
(See Chapter 5.2.)
2. Select Memory info in the submenu and press
the ENTER key.
3. Open Memory
info using the ENTER key.
The memory status is displayed.
1. Open the data settings menu.
(See Chapter 5.2.)
2. Select Delete everything in the submenu
and press the ENTER key.
3. Select yes to delete all key plans from the Pro-
grammer.