Kaba 1460 - Data Settings

User manual Commissioning
Kaba programmer 1460 k1evo809en-2014-04 23
5.5.1 Doors
5.5.2 Displaying actuator firmware
1. Open the data settings menu.
(See Chapter 5.2.)
2. Select Doors in the submenu and confirm using
the ENTER key.
Note: If no key plans are stored in the key plan
submenu, the menu is skipped.
3. Select the key plan and confirm using the ENTER
key.
4. Select the door and confirm using the ENTER
key.
1. Open the data settings menu.
(See Chapter 5.2.)
2. Select Actuator firmware in the submenu and
confirm using the ENTER key.
All technology variants of the
actuator firmware that are on the Programmer
are displayed.
3. Select the technology variant and confirm using
the ENTER key.
All actuator types (firmware) that are on the Pro-
grammer are displayed.
4. Select the actuator type and confirm using the
ENTER key.
The actuator firmware versions available for the
selected actuator type are displayed.
Search for the desired firmware.