Kaba 1460 - Page 21

User manual Commissioning
Kaba programmer 1460 k1evo809en-2014-04 21
5.4.3 Light signal
5.4.4 Opening time
The function cannot be used for actuators
without a light ring.
1. Open settings menu. (See Chapter 5.2.)
2. Log in to the actuator using Programming
master.
3. Select Light ring in the submenu and confirm
using the ENTER key.
4. Select Light ring on or off and confirm using
the ENTER key.
1. Open settings menu. (See Chapter 5.2.)
2. Log in to the actuator using Programming
master.
3. Select Opening time in the submenu and
confirm using the ENTER key.
4. Select an opening time of between 2, 4, 6, 10,
20, 30, 45 seconds and 1 minute and confirm
using the ENTER key.