Kaba 1460 - Setting the date and time

User manual Commissioning
Kaba programmer 1460 k1evo809en-2014-04 17
5.3.4 Setting the date and time
5.3.5 Setting illumination
Correctly set values for date and time ensure
current time management with the actuators.
1. Open the Programmer settings menu. (See
Chapter 5.3.)
2. Select the Date/time submenu and
confirm with the ENTER key.
The cursor (blinks) indicates the active posi-
tion.
3. Enter the current date and current time using
the alphanumeric keys.
Note: Skip the positions of the cursor using
the navigation key UP and DOWN.
4. Confirm the set date and time using the
ENTER key.
1. Open the Programmer settings menu. (See
Chapter 5.3.)
2. Select the Illumination submenu and con-
firm using the ENTER key.
3. Select the lighting variant and confirm using
the ENTER key.