Kaco blueplanet 10.0 NX3 M2 User Manual

Page 27 KACO blueplanet 3.0 NX3 M2 KACO blueplanet 5.0 NX3 M2 KACO blueplanet 8.0 NX3 M2 KACO blueplanet 10.0 NX3 M2
KACO blueplanet 15.0 NX3 M2 KACO blueplanet 20.0 NX3 M2
Below you will find illustrations of the connection options for initial start-up of the device and its optional integration into a
local network.
If you integrate the device into a local network, it is possible to connect the device to a web portal or a client (data logger,
system controller).
Option 1: Set-up via hotspot (with APP connection to the inverter with communication unit)
Fig. 38. Set up communication unit via mobile end device – hotspot
Option 2: Set-up via local network
Fig. 39. Set up communication unit via local network – WiFi 2.4G
NOTE
Please note the additional documents for the communication structure with and without data logger.
These can be found in the download area on our homepage in the device order under application note.
Hotspot
Inverter
AC
3ph/N/PE
PV generator
Consump�on
Grid
Inverter with
communica�on device
KACO NX Setup
Cloud
WiFi
2.4G
AC
3ph/N/PE
PV generator
Router
blueplanet web
Consump�on
Grid
Inverter with
communica�on device
KACO NX Setup
Internet

Kaco blueplanet 10.0 NX3 M2 Specifications

General

Model	blueplanet 10.0 NX3 M2
Manufacturer	Kaco
Category	Inverter
Max. AC Output Power	10000 W
Max. DC Voltage	1100 V
Number of MPPTs	2
Max. apparent AC power	10000 VA
AC frequency	50 Hz / 60 Hz
Max. AC current	16 A
Max. DC current	26 A
Protection class	IP65
Topology	Transformerless
Operating Temperature Range	-25°C to +60°C
Cooling	Convection
Max. DC power	15000 W
AC Output Voltage	230 V / 400 V
AC voltage range	230 V / 400 V