Page 65 KACO blueplanet 3.0 NX3 M2 KACO blueplanet 5.0 NX3 M2 KACO blueplanet 8.0 NX3 M2 KACO blueplanet 10.0 NX3 M2
KACO blueplanet 15.0 NX3 M2 KACO blueplanet 20.0 NX3 M2
11.3 Disassembling the device
Unit has been switched off and uninstalled.
1 Remove the screw that prevents the device from being lifted off the mount.
2 Use the lateral openings and lift the device off the mount.
» Device removed. Proceed with the packaging process.
11.4 Packaging the device
Device has been uninstalled.
1 If possible, always pack the device in the original packaging. If this is no longer available, an alternative is to use
equivalent packaging.
2 The packaging box must be fully sealable and suitable for the weight and size of the device.
11.5 Storing the device
Property damage as a result of condensation
Incorrect storage can cause condensate to form in the device and impair the functionality of the device
(e.g. storage outside the ambient conditions or temporary relocation from a cold to a hot environment).
Store in accordance with the technical data > environmental data.
› Prior to installation, check the inner area for condensation and if necessary, allow it to dry sufficiently
before installation.
Device packaged.
Store the device in a dry place in accordance with the ambient temperature range specified in the environmental
data.
12 Disposal
CAUTION
Risk to the environment if disposal is not carried out in the correct manner
For the most part, both the device and the corresponding transport packaging are made from recyclable raw
materials.
Unit: Defective devices and accessories must not be disposed of with household waste. Ensure that the old
devices and any accessories are disposed of in a proper manner.
Packaging: Ensure that the transport packaging is disposed of properly.
13 Service and warranty
If you need help solving a technical problem with one of our KACO products, please contact our service hotline. Please have
the following information ready so that we can help you quickly and efficiently:
• Device name / serial number
• Date of installation / Start-up report
• Error message shown on the display / Description of the error / Did you notice anything unusual? / What has already
been done to analyse the error?
• Module type and string circuit
• Consignment identification / Delivery address / Contact person (with telephone number)
• Information about the accessibility of the installation site.
You can find the following items and other information on our website Kaco-newenergy:
• our current warranty conditions,
• a complaint form,
• a form for registering your device. Please register your device without delay. In this manner, you can assist us in
providing you with the quickest service possible.
To Next Page
Loading...
Need help?
General
