Kaco blueplanet 10.0 NX3 M2 User Manual

KACO blueplanet 3.0 NX3 M2 KACO blueplanet 5.0 NX3 M2 KACO blueplanet 8.0 NX3 M2 KACO blueplanet 10.0 NX3 M2
KACO blueplanet 15.0 NX3 M2 KACO blueplanet 20.0 NX3 M2 Page 34
9.7.3 Configure network parameter
Note: Here you can assign a static IP address
to the inverter so that your router always
uses the same address.
 Connection to the unit established
1. Select <Properties communication unit>.
2. <DHCP> for automatic IP address
assignment or for more security.
3. <DHCP> deactivate <DHCP> and enter IP
address for your inverter.
4. Optionally: Activate <DNS> and enter
primary DNS address.
5. Save settings with <Confirm.>.
» IP settings successfully carried out.
Fig. 59. Set unit parameters
Fig. 60. View all parameters
Fig. 61. Setting the IP address
Fig. 62. Activate DNS
Fig. 63. Set DNS address

Kaco blueplanet 10.0 NX3 M2 Specifications

General

Model	blueplanet 10.0 NX3 M2
Manufacturer	Kaco
Category	Inverter
Max. AC Output Power	10000 W
Max. DC Voltage	1100 V
Number of MPPTs	2
Max. apparent AC power	10000 VA
AC frequency	50 Hz / 60 Hz
Max. AC current	16 A
Max. DC current	26 A
Protection class	IP65
Topology	Transformerless
Operating Temperature Range	-25°C to +60°C
Cooling	Convection
Max. DC power	15000 W
AC Output Voltage	230 V / 400 V
AC voltage range	230 V / 400 V