Kalerm KLM2601 - Disassemble Solenoid Valve Group; Disassemble Grinder Group

4.2.6 Disassemble solenoid valve group
1. Refer to 4.2.1-disassemble exterior parts
2. Disassemble hooks from support 3. Pull out terminal and silicon pipe
and take out solenoid valve group
4.2.7 Disassemble grinder group
1. Refer to 4.2.1.1-4.2.1.6-disassemble top cover
2. Disassemble 3 screws 3. Pull out grinder motor terminal from
PCBA and take out grinder group