Precautions for assembling
1. Assemble the drain valve support, pin,
pin sleeve, pin reset spring, pin seal together
as the picture shows. Pay attention to the
direction of the pin seal.
2. Assemble the drainage export and pin
seal together.
3. Assemble the pin seal, pin and drainage
valve pipe into the drainage valve. Pay
attention to the direction of the pin seal as
the picture shows.
4. Put the stepper motor and drainage valve
support lock together. Pay attention to the
direction of the stepper motor.
5. Assemble them into drainage valve, and
install the seal, Teflon pipe and clamps.
6. Rotate the tail of the stepper motor to
make the axis of the stepper motor stand up
to the drain valve support until it cannot
stand up any more.
Drainage valve group
To Next Page
Loading...
