1. Press the gear pin into the hole of the
gearbox, and put the dispenser valve
motor to gearbox . The screws need a few
loctite.
2. Install dispenser valve gear A and
dispenser valve gear B into dispenser valve
gearbox after coat oil(MI-setral-61B).
3. Install the gear box lid and sheave drive
part, pay attention to the position of the
sheave drive part.
4. Install 2 screws inside the sheave permanent
seat.
5. Install microswitch line pencil switches to
sheave permanent seat and dispenser
valve separately. Pay attention to the
position and the direction of the sheave
and microswitch.
6. Assemble the sheave permanent seat and
dispenser valve together.
Dispenser valve group
To Next Page
Loading...
