Kamic Installation ZEUS4-VD - Pre-Pay Card Credit and Validity Information; Programming Pre Pay Card Credit and Validity String; CC Parameter for Remote Programming

ZEUS-VD INSTALLER’S MANUAL
9.15 PRE-PAY CARD CREDIT AND VALIDITY INFORMATION
If we use the pre-pay SIM card into the ZEUS4-VD it is very useful if we can get the information
about remain credit.
The GSM providers have different ways to get the credit information. At the moment we can hold
up 3 different strings.
The Zeus4-VD will automatically send the low credit SMS when the credit comes below 3€!
9.15.1 Programming pre pay card credit and validity string
ZEUS4-VD - GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name Number Description
CC1 *XXX#
* + Number +#
CC2 4916
TIM Italy
CC3 404
Vodafone Italy
CC1=*448# for SIMOBIL; *123# for MOBITEL
This method can use all users that get the credit message on this way by GSM phone (press
*+provider number+” & call button).
CC2 method is dedicated to Italian TIM mobile provider.
CC3 method is dedicated to Italian Vodafone mobile provider
9.15.2 CC parameter for remote programming
For the upper example send the following SMS to ZEUS4-VD:
1. CC1 (Simobil) ;CC1=*448#;
2. CC2 (TIM) ;CC2 =4916;
Page
25
3. CC3 (Vodafone) ;CC3=404;