EasyManua.ls Logo

Kamic Installation ZEUS4-VD - 2 Features

Kamic Installation ZEUS4-VD
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZEUS-VD INSTALLER’S MANUAL
2 FEATURES
Built in GSM module
4 alarm inputs
4 remote control alarm outputs
Pre-recorded alarm messages – 1 for each alarm input
SMS for each alarm input
Memory stores up to 10 different telephone numbers
Dialing of telephone number sequences can be programmed
Listen-in function
LED displays enable easy monitoring
Already activated dialing sequence can be stopped by means of user's telephone unit
Download programming by SMS
Input and Output status checking by SMS and DTMF command
Outputs remote control by SMS, CLIP and DTMF command
System activating and deactivating by SMS, CLIP and DTMF command
Phone book memory clear by SMS command
Full print out of programming parameters by SMS
Print out by parameters groups (14 groups)
Pre-pay cards credit and value checking
Security protected for incoming calls
Call back device checking Manual fix of the GSM network
Easy new firmware downloads with the ISP programming cable
Event log with the time stamp
Page
2

Table of Contents