10
adjuncts or accessories to the units. Hardware units and the media containing
firmware, software and documentation are sold to the consumer purchaser and
become property of the purchaser. Firmware and software are licensed for use by
the consumer purchaser in return for a fee included in the purchase price of the units
and do not become the property of the consumer. (See separate License Agreement
provided with these products). The products to which the warranty of Section 1
hereof applies (herein ―Applicable Products‖) and the periods during which the
warranty shall apply to such products (herein, ―Applicable Warranty Period‖) are as
follows:
Applicable Products:
UNITS:
KPC-3 Plus, KPC-9612 Plus, KAM XL, MT1200, MT1200G
Applicable Warranty Period: One (1) year from date of purchase.
MEDIA:
EPROMS, CDs, manuals (however bound), specification and other
supplemental pages or any other media on which firmware, software or
documentation are supplied
Applicable Warranty Period: Thirty (30) days from date of purchase.
6. EXCLUSIONS. This Limited Warranty does not apply to the cosmetic appearance
of the Applicable Product; to broken or cracked cabinets; to any accessory not
supplied by Kantronics which is used with the Applicable Product; to any product
that has been subject to misuse abuse or overvoltage; to any product that has been
modified by non-Kantronics personnel unless specifically authorized in writing by
Kantronics; or to any product damaged or impaired by shipping (whether or not
caused by poor packaging), neglect, accident, wiring not installed by Kantronics,
improper parameter settings which are cleared by performing a hard reset, or use in
violation of instructions furnished by Kantronics or of generally accepted industry
practice. Kantronics does not warrant that the functions contained in any software
will meet your requirements or achieve your intended results; or that operation of
any software will be uninterrupted or error-free or without effect upon other software
used with it. Responsibility for the selection of the hardware and software program to
achieve your intended results rests with you.
7. REMEDY PROCEDURE. Should you need to make a warranty claim, first contact
the dealer from whom you purchased the product. If the dealer is unable to assist
you, contact us prior to returning an Applicable Product to receive a Return
Authorization Number. (As a practical matter, problems can often be solved in such
a manner without the product having to be returned to Kantronics for repair or
replacement.)
To Next Page
Loading...
