135
TheNET X1-J I K-Net Cross-reference Guide
This cross-reference guide is included to assist in the coordination of node parameters if
an X1-J node is located in your area. The basic X1-J PARMS can be listed by
connecting to an X1-J node and giving the P command. This should precipitate
meaningful discussion among node sysops in an attempt to arrive at a "Network
Standard" of node parameters that benefit all users.
X1-J PARM K-Net COMMAND
1. Max. Destination Node Size NETDEST
2. Min. Auto update quality MINQUAL
3. Neighbor default quality QUALITY
4. RS232 default quality QUALITY
5. Initial obsolescence count OBSINIT
6. Min. Obs. count to broadcast OBSMIN
7. Node broadcast interval NODESINT
8. Initial Time-to-Live L3TTL
9. Transport Frack timeout (sec) L4T1
10. Transport Retry counter L4N2
11. Transport Ack Delay (sec) L4DELAY
12. Transport Busy Delay (sec) N/A
13. Transport Window Size (frames) L4WINDOW
14. Transport Overfill Limit (frames) N/A
15. No Activity Time Out L4LIMIT
16. Persistence cmd: PERSIST
17. Slot cmd: SLOTTIME
18. Link Frack (T1) cmd: FRACK
19. AX.25 Maxframe cmd: MAXFRAME
20. AX.25 Retries cmd: RETRY
21. Link Response Time (T2) N/A
To Next Page
Loading...
