15
• Line Number
• Private and Common Pool Number
• Function Services (Services such as Follow Me, Call Back, Do Not Disturb,
Telephone Lock, Conference, Night Mode)
• [FT20] Feature codes (DS200 programming and user codes, such as entry to
programming by the code 877777, Do Not Disturb function by the code 831.)
These assignments are done to the first or the second functions of the key during the
program entry done by pressing the “menu” option. Assignment is done to the first
function if the key is pressed for a short time, and it is done to the second one if the key
is pressed for a longer period. Transition of the key to the first or second function is
indicated by a short or a long beep, respectively. Besides, the LED that belongs to the
key lights in green for the first function and lights red for the second one during
programming.
When the keys that have been programmed for extension, line, private or common pool
are pressed, these numbers are called directly. When the keys that have been
programmed for the services such as Follow Me and Call Back are pressed, these
services are activated directly or a necessary input is prompted. (Such as the extension
number, to which the Follow Me action will be carried out.)
When the keys, to which “User Code” has been numerically assigned, are pressed, the
service that has been determined through the user code is activated directly or the
appropriate code is prompted. The Follow Me service (85) and the extension number to
which the forwarding will be done would constitute an example for that kind of usage.
FUNCTION PROGRAMMING FOR THE SPEED DIAL KEYS
This feature provides for taking advantage of some functions that have been defined for
FT10 and FT20 in the exchange properties, by pressing a single key. A user may
program for those keys the features presented by the Karel telephone branch
exchange, which s/he would use most frequently.
Different methods can be employed for assigning functions to the programmable keys
of the FT10 and FT20 feature telephone sets. These operations are carried out for
FT10 through the submenus of Function, Private Pool or Automatic Programming in the
Phone Settings > Key Settings option. For FT20, on the other hand, they are carried
out through the submenus of Feature, Feature Code or Automatic Programming in the
Phone Settings > Key Settings option.
By the Function Programming Menu: FT10 and FT20
Features most frequently employed by users are among those options. The
programming can be carried out by assigning desired ones out of the 10 options that
have been presented in the Key Settings > Feature submenu, in order to apply that
programming option. First the key to be used is selected, then the desired one out of
the 10 presented functions is brought to the display through the right/left navigation
keys and the programming is completed by the “Accept” key. These selections have
been explained below:
To Next Page
Loading...
