50
before, then the program is not accepted; it is accepted only if it has not previously
been set and the LED that belongs to that key is turned on. (This system is like the
one in the Extension Programming, the message “Successful” is displayed for 1
second and confirmation tone is received.)
The functions are as follows:
Function Options:
• Follow Me
• Call Back
• Do Not Disturb
• Telephone Lock
• Conference
• Night Mode *
• Auto Dial Key (FT10)
• Message Listen Key
• Page Key
• Call Pick Up Key (FT20)
* It applies only when the user is the operator.
Feature Code [FT20]
Any code of 8 digits can be assigned to the programmable keys by using this menu
option.
♦ Press Key: The key, on which the programming will be done, is pressed for a
short or a long period in order to select the first or the second function,
respectively.
♦ Code: This code may be one, such as 85 (Follow Me) that could be applied by a
user, one, such as 8389 (Wake Up service) that could be applied by the operator
or one, such as 877777 (Entry to exchange programming) that could be applied by
the system supervisor. If the entered number is none of these, then it is detected
as an extension number and that extension is called whenever that key is used.
Auto Settings
FT10
There are five different options in order to program the programmable keys
automatically. The keys are automatically programmed upon proceeding to the desired
option and selecting it. These programming options are:
♦ Option 1 (Extension Numbers)
♦ Option 2 (Line Numbers)
♦ Option 3 (Common Pool Numbers)
♦ Option 4 (Automatic Functions)
♦ Clear All
To Next Page
Loading...
