7
TECHNICAL INTRODUCTION
INTRODUCTION
FT10 is a telephone set, which can be used with all MS series exchanges of KAREL,
and that provides ease and rapidity to the usage of those systems.
NOTE: FT10 is not compatible with the MS26S exchange, as an exception.
FT20, on the other hand, is a telephone set, which can be used with the entire DS
series exchanges of KAREL and whose utilization characteristics are significantly
similar to that of FT10. Differences between the two products arise from the fact that
the features supported by the DS and MS type exchanges are different. Those facts
have been specified in the guide; they are supposed to be considered during usage.
By the FT10 and FT20 telephone sets:
• Users are provided with the facility of performing several operations such as calling
back, auto dialing, follow me, conferencing and alarm setting, by pressing a single key
through special-purpose keys and the display that are on the telephone, without the
necessity to know the system-specific special codes.
• Active services and call information, as well as the actions that the user can take for
them, are displayed through the four-line LCD (liquid crystal).
• Actions that can be taken for the active services and the call information, which are
indicated on the LCD display, are carried out easily and rapidly through four keys with
special functions that are located below the display.
• One-touch extension and/or line calls can be made over the phone book and
programmable keys. (This facility is valid or MS Series software with the version ACA
or better.)
• Statuses of the extensions and/or lines that have been assigned to those keys can be
viewed through the lights (LED) in two colours, which are embedded into the
programmable keys.
COMPATIBILITY
The FT10 telephone set is compatible with the 3.11H or better software of the
exchanges of models MS26C, MS38S, MS48, MS48S, MS48C, MS128 and MS224.
The FT20 telephone set is compatible with the entire versions of the exchanges of
models DS200, DS200S and DS200M.
PARTS LIST ON DELIVERY
Parts that are included in the FT10 or FT20 package:
• FT10 or FT20 telephone,
• Handset,
• Spiral cable of the handset,
• Data cable with RJ11 connectors at two ends,
• Console connection box,
• Technical Reference and User Guide,
To Next Page
Loading...
