32
UTILIZATION FEATURES
DEFAULTS AND ACTIVE SERVICE
INFORMATION
The display is the most active conductor for the usage of the FT telephones. The
telephone is easily utilized by viewing through the display the active features of the
telephone and the exchange, information about incoming calls, options that could be
applied during a call, data coming over the network and the options for Phone Settings.
Hence, utilization features of the telephone will be explained from the beginning by the
LCD display views.
1. While Telephone Is On Hook:
On the LCD display, time, date and services that have been activated at that moment, if
there are any, or system services that are active are visualized while the telephone is
on hook.
SAMPLE DISPLAY WHILE THE TELEPHONE IS ON HOOK
SAMPLE DISPLAY WHILE THE TELEPHONE IS ON HOOK AND THE ACTIVE
SERVICE IS PRESENT
1.1. The display order of the services that are active has been arranged so as the
most recent active service would be displayed first.
1.2. While telephone is on hook and there are messages on the display related to the
services that are active, a user can perform operations related to those services
with ease. For instance, s/he can view the contents of Missed Calls through the
“Details” key. In that mode of the telephone, the Missed Call information is
displayed in the middle line of the screen as source of the call (line or extension),
access code of the source, hour and minute of the call, respectively. Moreover,
date and time information is displayed in the top line of the screen and operations
that could be done on Missed Calls at the bottom line. If the numbers in the
Missed Call list have been saved in the phone book, then saved names in the
phone book, instead of numbers, are displayed.
To Next Page
Loading...
