KaVo ABSORmatic plus - A 8 Operation; A 8.1 Automatic mode; A 8.2 Continuous mode

13
ABSORmatic
®
plus.
A 8 Operation
Dust collectors of Type ABSORmatic

have versatile applications and are particu-
larly suitable for the extraction of dusts
normally occurring in dental laboratories in
manual finishing work.
Safe operation and protection of the
equipment is ensured only with cor-
rect use according to the Operating,
Maintenance and Assembly Instructions.
Correct use:
Extraction of dust normally occurring in
dental laboratories. No water, no explosive
substances (vapours, gases etc.) must be
sucked in.
The manufacturer accepts no responsibility
for damage occurring as a result of incor-
rect use.
Compliance is required with accident
prevention regulations.
A 8.1 Automatic mode
Recommended for normal operation.
Pressing pushbutton  switches from
“Continuous mode“ to "Automatic mode".
In automatic mode, suction only operates
when at least one of the installations con-
nected (e.g. K9 installation, K11 installa-
tion etc.) is put into operation.
A 8.2 Continuous mode
Suitable, for example, for use with tools
having no electrical connection (e.g. tur-
bine systems etc.).
In the case of a dust producer which
does not deliver an electrical signal
and where no external control panel is
available, continuous operation can be
switched by means of a foot switch (A 5.5).
Pressing pushbutton  switches from
"Automatic mode" to “Continuous mode“
(manual).
The “external“ control-displays connected,
having acces tor "his" allocated suction
passage only. On the main control display
of the ABSOmatic

plus, the neccessary
adjustment for "all" connected loads (dust
producers) and apparatures can be made.
A
B
S
O
R
m
a
t
i
c
®
AB
S
O
R
m
a
t
i
c
®
A
B
S
O
R
m
a
t
i
c
®
A
B
S
O
R
ma
t
i
c
®
ABSORmatic
®
¯