17
ABSORmatic
®
plus.
A 9 User utilities programme
Main switch at "I" = ON. The unit then
automatically measures the filling level and
clenas the individual suction hoses with the
maximum suction volume.
The display shows standard screen.
Select between combination screen or low
pressure screen.
Factory setting: combi screen (display)
9.1 Start mode - utility program
Press pushbutton "up" several times
until display shows "user program",
Press "Enter" . Press pushbutton "down"
˝ or "up" and dial the requested utility
program.
9.2 Utility program " User language"
Actuating pushbutton "up" or "down"
to select the untility program "lan-
guage" and press "Enter" .
Factory setting: German
Pushbutton "up" or "down" until the
display show the language wanted (ger-
man/english/french/italian/numerical).
Press pushbutton "Enter" to store the
selected language.
(2150) 9.2 Language 20 if numerically set, the code numbers apply, e.g. (
2150)
21 German
22 English
23 Italian
24 French
To Next Page
Loading...
