Instructions for use ELECTROmatic M/C and PM/PC
7 Decommissioning | 7.1 Disconnecting the electrical connection
60 / 78
7 Decommissioning
7.1 Disconnecting the electrical connection
▶ To disconnect the power cable from the mains, unplug the connector of the
power supply from the supply mains socket.
▶ Unplug the power cable from the device.
7.2 Disconnecting the ELECTROmatic from the dental
unit
▶ Disconnect the 4-hole, 5-hole or 6-hole hose of the dental unit from the fil-
ter or the adapter of the 2-hole to 4-hole connector of the ELECTROmatic.
7.3 Unplugging the motor/COMFORTdrive
▶ Disconnect the plug of the motor cable from the connector on the device.
Make sure to grasp the plug as close to the device as possible.
Note
Cleaning and disinfecting the motor connected with the motor cord.
See also:
2 Instructions for use INTRA LUX KL 703 LED / COMFORTdrive 200 XDR
To Next Page
Loading...
