MIDI Implementation
4
SOUND/SETUP Program/Bank
If the Receive Mode MIDI parameter is set to Panel (page 102), the MP11 receives MIDI data on the System Channel
only. To change internal sounds via MIDI, please refer to the SOUND Program Number list below.
* Note: If the MP11 receives the Program Number from 1 to 128 and Bank number MSB 0 or 1 in the System Channel, the MP11 will switch to SETUP mode and
the corresponding SETUP is recalled. When the Receive Mode is Section, the MP11 can be received to each internal sound sections individually.
Panel Mode:
SETUP Program Number
BANK#MSB 1: SETUP mode ON
BANK#LSB 0-25: BANK A-Z
PROGRAM 1-8: Setup Variation 1-8
SOUND Program Number
BANK#MSB 0: SETUP mode OFF
BANK#LSB 0: PIANO Section
1: E.PIANO Section
2: SUB Section
PROGRAM 1-12: PIANO/E.PIANO Section’s Sound variation 1-12
1-16: SUB Section’s Sound variation 1-16
* Only one sound section is activated.
Section Mode:
BANK#MSB (ignored)
BANK#LSB (ignored)
PROGRAM 1-12: PIANO/E.PIANO Section’s Sound variation 1-12
1-16: SUB Section’s Sound variation 1-16
*For each section’s Receive Channel.
*Not related to Setup ON/OFF.
To Next Page
Loading...
