Kawai MP11 - Controllers

47
EDIT Menu
EDIT Menu parameters (PIANO, E.PIANO, SUB)
6 Controllers
1. Right Pedal
This parameter determines whether or not the right pedal of
the F-30 pedal unit is active for the selected section.
2. Right Pedal Assign
This parameter selects the function assigned to the right pedal
of the F-30 pedal unit.
* This parameter is common for all three sound sections.
3. Soft Pedal Depth
This parameter adjusts the eectiveness (i.e. depth/strength)
of the soft pedal.
4. Damper Pedal Mode
This parameter determines whether or not the damper pedal
should sustain sounds indenitely without decay.
5. Center Pedal
This parameter determines whether or not the centre pedal of
the F-30 pedal unit is active for the selected section.
6. Center Pedal Assign
This parameter selects the function assigned to the centre
pedal of the F-30 pedal unit.
* This parameter is common for all three sound sections.
7. Left Pedal
This parameter determines whether or not the left pedal of the
F-30 pedal unit is active for the selected section.
8. Left Pedal Assign
This parameter selects the function assigned to the left pedal
of the F-30 pedal unit.
* This parameter is common for all three sound sections.
9. Pitch Bend
This parameter determines whether or not the pitch bend
wheel is active for the selected section.
10. Pitch Bend Range
This parameter sets the range of the pitch bend wheel in semi-
tone steps.
* The range diers for the internal sound (0 ~7) and MIDI (0~12) sections.
11. Modulation Wheel
This parameter determines whether or not the modulation
wheel is active for the selected section.
12. Modulation Wheel Assign
This parameter selects the function assigned to the MP11’s
modulation wheel.
13. Expression Pedal
This parameter determines whether or not the expression
pedal (if connected) is active for the selected section.
* For more information about connecting pedals, please refer to page 18.
14. Expression Pedal Assign
This parameter selects the function assigned to the expression
pedal (if connected).
* This parameter is common for all three sound sections.
* For more information about connecting pedals, please refer to page 18.

Assignable pedal/modulation wheel functions
Function Function
Modulation Damper
Panpot Sostenuto
Expression Soft
Function
Resonance
Cut-o
EFX Parameter 1 ~ 10 (piano, suB)
EFX1 Parameter 1 ~ 10, EFX2 Parameter 1 ~ 10 (e.piano)
on, off
on, off
value: 1 ~ 10
on, off
on, off
on, off
normal, Hold
on, off value: 0 ~ 7
18 functions (piano, suB)
28 functions (e.piano)
18 functions (piano, suB)
28 functions (e.piano)
18 functions (piano, suB)
28 functions (e.piano)
18 functions (piano, suB)
28 functions (e.piano)
MP11_EN_20140421_R102.indd 47 2014/04/22 8:48:56