EasyManua.ls Logo

Kawai MP11 - Sound Parameters

Kawai MP11
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
EDIT Menu
EDIT Menu parameters (PIANO, E.PIANO, SUB)
3
Sound
1. Volume
This parameter adjusts the volume level of the selected sound
independently of the section’s volume fader.
2. Panpot
This parameter adjusts the left/right position of the selected
sound within the stereo eld.
3. Filter Cut-o
This parameter adjusts the frequency of the cut-o. Raising
the cut-olevel increases the brightness of the sound, while
lowering the cut-o level results in a duller sound.
4. Filter Resonance
This parameter adjusts the amount of the harmonic overtone
around the cut-o frequency for the selected sound.
5. DCA Attack Time
This parameter adjusts the length of the attack. Higher values
increase the attack time, resulting in a longer, slower attack for
the selected sound.
6. DCA Decay Time
This parameter adjusts the length of the decay from peak level
to sustain level for the selected sound.
7. DCA Sustain Level
This parameter adjusts the volume level of the sustain heard
while the key is held for the selected sound.
8. DCA Release Time
This parameter adjusts the amount of time required for the
sound to fade out after the keys are released for the selected
sound.
9. DCF Attack Time
This parameter adjusts the length of the lter’s attack. Higher
values increase the attack time, resulting in a longer, slower
attack for the lter.
10. DCF Attack Level
This parameter adjusts the level of the lters attack.
11. DCF Decay Time
This parameter adjusts the length of the decay from peak level
to sustain level for the lter.
12. DCF Sustain Level
This parameter adjusts the level of the lter’s sustain heard
while the key is held for the selected sound.
13. DCF Release Time
This parameter adjusts the amount of time required for the
lter to fade out after the keys are released.
14. DCF Touch Depth
This parameter adjusts how much the velocity aects the lter
envelope depth.
15. DCA Touch Depth
This parameter adjusts how much the velocity aects the
amplitude envelope depth.
value: l64 ~ r63value: 0 ~ 127
value:64 ~ +63value:64 ~ +63
value:64 ~ +63value:64 ~ +63
value:64 ~ +63value:64 ~ +63
value:64 ~ +63value:64 ~ +63
value:64 ~ +63value:64 ~ +63
value:64 ~ +63value:64 ~ +63
value:64 ~ +63
MP11_EN_20140421_R102.indd 42 2014/04/22 8:48:55

Table of Contents

Related product manuals