Kawai MP11 - Rename Functions

96
USB Menu
4 Rename
These functions allow data stored on a USB memory device to be renamed.
1. Selecting the type of le to rename
Press the CURSOR buttons then the +/YES button or F4 function
button (NEXT) to select the type of le to be renamed.
Press the –/NO or F1 function button (BACK) to return to the
previous screen.
2. Selecting the le to rename
Turn control knob A or press the CURSOR buttons to move the
selection cursor. Then press the +/YES button or F4 function
button (EXEC) to rename the le.
Press the –/NO or F1 function button (BACK) to return to the
previous screen.
3. Renaming the le
Turn control knobs A and B to move the position of the cursor
and change the character, then press the F4 function button
(EXEC) to rename the le.
4. Conrming the le rename
Press the F2 function button (YES) or F3 function button (NO) to
conrm or cancel the rename le operation.
After renaming the le, the main USB Menu will screen will be
shown in the LCD display.
USB Menu functions
MP11_EN_20140421_R102.indd 96 2014/04/22 8:49:17