Kawai MP11 - Page 29

29
Main Operation
Internal Sections & Feature Parameters
or

Virtual Technician parameters
Page Knob Parameter Description Value range
1
A Voicing Adjusts the tonal character of the selected piano sound. [see below]
B Stereo Width Adjusts the stereo width of the selected piano sound. 0 ~ 127
C String Resonance Adjusts the resonance that is heard when notes are held. OFF, 1 ~ 10
D Damper Resonance Adjusts the resonance that is heard when pressing the damper pedal. OFF, 1 ~ 10
2
A Key-o Eect Adjusts the sound that is heard when keys are released. OFF, 1 ~ 10
B Damper Noise Adjusts the sound that is heard when pressing the damper pedal. OFF, 1 ~ 10
C Hammer Delay Adjusts the delay of the hammer striking strings when playing pianissimo. OFF, 1 ~ 10
D Fall-back Noise Adjusts the sound that is heard when the key action falls back. OFF, 1 ~ 10
3
A Topboard Adjusts the position of the grand piano topboard. [see below]
B Brilliance Adjusts the brightness of the overall piano sound. –10 dB ~ +10 dB
* Voicing types: Normal, Mellow1, Mellow2, Dynamic, Bright1, Bright2
Topboard types: Close, Open1, Open2, Open3
* For more detailed information about the PIANO section’s Virtual Technician parameters, please refer to page 50.

Adjusting Virtual Technician parameters
After entering the Virtual Technician parameters page:
Press the CURSOR buttons to move the selection cursor, and
through the EDIT menu pages.
* The F1 and F4 buttons can also be used to scroll through the dierent EDIT
menu pages.
Press the +/YES or -/NO buttons to increase or decrease values.
Page 1/3
Page 2/3
Page 3/3
Alternatively, turn the control knobs (A, B, C, D) to adjust the
parameter assigned to that knob.
Press the EXIT button to return to the main EDIT menu.
MP11_EN_20140421_R102.indd 29 2014/04/22 8:48:50