Kawai MP6 - SW Button Functions; Panel Lock & Touch Curve

22
3. SW Button
3. SW Button
The SW button is a programmable realtime switch which can be assigned to one
of 8 dierent functions.
Press and hold the SW button. The display shows the currently assigned function.
Press the SW button again to exit without changing the function.
SW TYPE/COMMON
1:Panel Lock
Use the VALUE buttons to change the function. The display will automatically
return to SOUND or SETUP mode after you change the function.
This function can be stored using the STORE button. (see page 55)
When the MENU function is displayed, the SW button works as an EXIT button.
3.1 Panel Lock
You can lock the panel operation to avoid unnecessary changes to the settings
by accident.
When the SW button is lit Panel Lock is ON.
Panel Lock On: All the operations except for keyboard, wheels, pedals and SW
button are locked. The display shows as follows while the panel is locked.
Panel Lock
>Press[SW]button
Panel Lock O: Panel Lock is canceled.
3.2 Touch Curve
You can temporary turn on/o the Touch Curve for example to play organ
sounds correctly.
Touch Curve On: The display briey shows the selected Touch Curve in the
SYSTEM and the Touch Curve becomes active. If the selected Touch Curve in the
SYSTEM is O, the Normal Touch Curve becomes active.
Touch Curve O: The display briey shows as follows and the Touch Curve
becomes O.
Touch Curve
Off