Kawai MP6 - Channel Mode Message; System Real Time Message; Exclusive Data; Universal Real Time Exclusive Message

95
13. MIDI Implementation
After Touch
Status 2nd Byte
DnH ppH
n=MIDI channel number :0H-fH(ch.1 ~ ch.16)
pp=Value :00H - 7fH Default = 00H
*Sending only when EXP CC#=AFT
Pitch Bend Change
Status 2nd Byte 3rd Byte
EnH llH mmH
n=MIDI channel number :0H-fH(ch.1 ~ ch.16)
mm,ll=Pitch bend value :00 00 - 7f 7fH(-8192~0~+8192) Default = 40 00H(center)
13.2.2 Channel Mode Message
MONO
Status 2nd Byte 3rd Byte
BnH 7eH mmH
n=MIDI channel number :0H-fH(ch.1 ~ ch.16)
mm=mono number :01H(M=1)
POLY
Status 2nd Byte 3rd Byte
BnH 7fH 00H
n=MIDI channel number :0H-fH(ch.1 ~ ch.16)
13.2.3 System Real time Message
Status
F8H Clock
FAH Start
FCH Stop
*Sending [SW] External Seq. Start/Stop
13.3 Exclusive Data
13.3.1 Universal Real time Exclusive Message
Master Volume
Format:F0 7F 7F 04 01 ll mm F7
mm=MSB of Master Volume
ll=LSB of Master Volume