Kawai MP6 - Expression Pedal Lock; Amp Simulator On;Off (ZONE1 Only)

25
3. SW Button
3.7 Expression Pedal Lock
You can lock the expression pedal to avoid unnecessary movement by
accident.
First, connect an expression pedal to the EXP jack on the rear panel of the MP6.
When the SW button is lit the Expression Pedal Lock is on.
Expression Pedal Lock On: The display briey shows as follows and the expression
pedal is locked.
EXP Lock
On
Expression Pedal Lock O: The display briey shows as follows and the expression
pedal is unlocked.
EXP Lock
Off
Note:
When the EXP Lock is turned on and the expression pedal is used, the display
briey shows as follows.
EXP Lock
>Press[SW]button
3.8 Amp Simulator On/O (ZONE1 only)
You can enable an Amp Simulator eect by turning the SW button on.
When the SW button is lit the Amp Simulator is on.
Amp Simulator On: The display briey shows as follows and the Amp Simulator
turns on.
Amp Simulator
On
Amp Simulator O: The display briey shows as follows and the Amp Simulator
turns o.
Amp Simulator
Off
Note:
The Amp Simulator will be eective for ZONE 1 only.
* Please refer to page 38 of this owner’s manual for further details regarding the
Amp Simulator.