Kawai MP6 - Wheel Mode

66
10. SYSTEM Button
10.2.25 Wheel Mode
This parameter determines whether or not the modulation wheel can be used
to edit parameters like a value dial.
Normal: The wheel functions as a performance wheel and controls the CC
controller that is assigned in the setup menu (Default).
Edit:
The wheel is used to edit parameters. The value will not change
until the wheel reaches the position of the previously set the value.
It can be used to edit the following parameters:
* SETUP parameters in the MENU except Zone mode and Sound
* SETUP name when stored
* Function SW assign, EFX/REVERB type
* Tempo of the metronome
Note:
* When the Wheel Mode is set to “Edit”, the normal function of the wheel is ineective, and
the wheel parameters will show an asterisk.
1 Concert Grand
Modulation =*On
COMMON
M.WheelCC# =*Mod
SYSTEM
WheelMode=Normal