Kawai MP6 - System Reset

67
10. SYSTEM Button
10.3 System Reset
10.3.1 Reset One SOUND/SETUP
This function resets one SOUND or SETUP back to the original factory default
settings.
Press the SYSTEM button. Then press the MENU d button until “Reset
X-X-X” (X-X-X stands for the setup number) appears on the display. Now use the
SOUND SELECT buttons to select the sound or setup you want to reset.
Press the VALUE c button. The display will ask for conrmation.
To cancel the Reset procedure at this point, press the VALUE d button.
Otherwise, press the VALUE c button again.
The display will show “Completed!!” after nishing.
Note:
* The selected SOUND/SETUP data will be overwritten by the factory settings.
10.3.2 Reset All
This function performs a global reset of all 256 SOUNDs, all 256 SETUPs and
SYSTEM settings back to the original factory default settings.
Press the SYSTEM button. Then press the MENU d button until “Reset All”
appears on the display.
Press the VALUE c button. The display will ask for conrmation.
To cancel Reset All at this point, press the VALUE d button.
Otherwise, press the VALUE c button again.
The display will show “Completed!!” after nishing.
Note:
* All the data in the MP6 will be overwritten by the factory settings.
Reset 6-4-A
Press VALUE UP
Reset 6-4-A
Sure?
Reset 6-4-A
Completed!!
Reset All
Press VALUE UP
Reset All
Sure?
Reset All
Completed!!