68
11. USB Button
11. USB Button
The USB button contains functions to load and save sounds, setups, system settings, and songs from/to
a USB memory device. This menu also allows les to be renamed and deleted, and for the USB memory
device to be formatted.
Load Load data stored on a USB memory device into the MP6’s internal memory.
Save Save data held in the MP6’s internal memory to a USB memory device.
Rename Rename a le stored on a USB memory device.
Delete Delete a le stored on a USB memory device.
Format Format a USB memory device, erasing all stored data.
Selecting the USB menu
First, connect a USB memory device to the USB to Device connector.
Press the USB button.
The USB menu will be shown in the LCD display.
Press the MENU c or MENU d buttons to select the desired USB function, then
press the VALUE c button to enter the menu.
File selection screen examples:
[Parent Dir ] Return to previous folder
<Classical > Folder
Audio_001.MP3 File (MP3 format)
Audio_002.WAV File (WAV format)
11.1 Load
11.1.1 Selecting Load
Follow the instructions above to select the Load function from the USB menu.
The USB Load menu will be shown in the LCD display.
Press the MENU or VALUE buttons to select the desired USB Load function.
SETUP Load SETUP data from a USB memory device.
SOUND Load SOUND data from a USB memory device.
SYSTEM Load SYSTEM data from a USB memory device.
SMF Load SMF song data from a USB memory device.
Note:
* Loading SETUP, SOUND, or SYSTEM data from a USB memory device will overwrite the
existing data currently stored in the MP6’s internal memory.
1..Load
Press VALUE UP
<SETUP SOUND>
<SYSTEM SMF>
1..Load
Press VALUE UP
To Next Page
Loading...
