Kaypro 10 - Page 145

< -
COR CorrectabLe error. An error was detected in
the data fieLd, but the controLLer was abLe to
PHYSICALLY CORRECT it. This is an acceptabLe
error.
IDC CRC error in ID FieLd. The sector was found,
but the ID fieLd contained an error and
couLdn't be trusted.
NID ID not found.
aLL.
The sector couLd not be found at
TRO Track Zero.
expected.
Track zero not asserted when
UND Undefined Error. Simi Lar to ??? Very
serious; contact deaLer.
UNC UncorrectabLe Error. The controLLer found an
error and was not abLe to correct it.
WFT Write FauLt. A fauLt condition occurred during
a write attempt, and the write was aborted.
??? Error detected, but no fLag set by controLLer.
This error is theoreticaLLy impossibLe. If you
get this error, DO NOT USE THE COMPUTER any
further. Contact your deaLer.
Other Errors. Look for errors that are not ln the
LogicaL range of possibiLity, such as:
* Sector numbers greater than 16
* CyLinder numbers greater than 305
* Head numbers greater than 3
* Incorrect disk numbers
* Any numbers not in the range you have
specified
These errors generaLLy indicate fauLts in other
areas of the system, such as memory or the hard
disk controLLer. Notify your deaLer.