Kaypro 10 - THE CURSOR AND CURSOR KEYS

THE CURSOR AND CURSOR KEYS
The cursor is a place marker to show where information can be entered. On the
KAYPRO 10, it is indicated by a flashing rectangle. The next character you type
will appear at this location.
When you are using certain programs, you can use the cursor keys (arrow keys)
to move the cursor freely in any direction on the screen:
UP
DOWN LEFT RIGHT
You can use the CON FIG program to change the arrow keys to act as any
character or control key that you desire. Look in the index under, "arrow keys,
reconfig uri ng."
These keys will not function in this manner in CP/M.
10