Kaypro 10 - Page 43

NO FILE
or
File not found
until you change to the proper drive. For example, if you want to know how much
space is left in a user area, then, after the AO> prompt, type:
STAT
The STATus of drive A, user 0, will be given.
After the AO> prompt, you could type:
STAT B:
and the STATus of drive B, user 0, would be given.
You can also change the currently-logged drive from drive A to drive B by typing
a B: after the AO> prompt.
After pressing RETURN, you would see the prompt, BO> Now, if, after the BO>
prompt, you type:
STAT
you will see th"e STATus of the files in drive B.
The same instructions apply to drive C if there is a diskette in it.
You can find the STATus of all the files in a drive by using a "wild card" consist-
ing of *. *. It is spoken of as "star, dot, star". After the A > or B >, type: STAT *. *
This is a helpful utility if you need to do some diskette space allocation and
need
to know how much space is used by each file.
Read your CPIM manual, especially the first 33 pages, for more details. The
following programs were developed especially for KAYPRO.
31