Kaypro 10 - Page 56

)
)
You will see listed the names of files for Perfect Calc, some of which are ap-
plications already set up to use as they are or to modify.
4. Type: PC CHECK.PC
Press
RETURN.
The
PC tells the computer that you want to use the Perfect Calc program.
CH
ECK.PC tells the computer that you want to use the check file.
While the program is loading, a blank spreadsheet will be displayed.
After the program has loaded, there will be displayed a check register program.
5 . . Using
the arrow keys, move the cursor to the location following:
Beginning Balance =
Note: You can cancel commands by using CTRL-G.
6. Type an amount.
As you type the
amount, it will appear in the status line at the bottom of the
screen. If corrections are needed, use the DELete key.
7. Press the RETURN key.
There
will be a pause while the balance is entered.
8. Move the cursor to check number 1.
9. Type the number of the check with which you want to start.
10. Press the RETURN key.
Watch the numbers automatically change to follow the number you have
entered.
For now, skip the data and description columns.
44