Kaypro 10 - Page 66

Include .BAS at the end of your filename whenever you write an S-BASIC pro-
gram.
You have just created a new file.
4. Type:
Print
"This is my first S-BASIC program."
5. Press RETURN.
6. Now to save this program, enter:
CTRL-X CTRL-S
(Press CTRL and,
while holding it down, type X, then S.)
The following will appear in the lower left portion of the screen:
File Written
7. To exit Perfect Writer, enter:
CTRL-X CTRL-C
You will see:
Warm Boot
A6>
8. Then enter: SBASIC TRYOUT
Press RETURN.
Your program will be written on the screen, and the message will appear:
****** End of program ******
Entering SBASIC TRYOUT causes the computer to start compiling your pro-
gram.
For more information on compiling, refer to your S-BASIC User's Guide.
54