Kaypro 10 - Page 68

)
)
User area 6 contains three basic files that you can compile and run:
FAC.BAS
DPLAY.BAS
XAMN.BAS
This program computes the factorial of an input number.
This program illustrates the sequential access of a random
file, specifically working with the RECORD.SEQUENTIAL
ON/OFF statement. If this statement is OFF, then all variables
of a random record must be read or written in one statement. If
it is ON, you can read or write part of a random record.
With this program, if you have the technical knowledge, you
can examine diskettes for bad sectors, look at and change
data in sectors, move sectors, map a diskette or a file, and
compute logical blocks. When the program first comes up, you
have to specify the drive which contains the file you want to
examine (A = 0, B = 1).
56