)
)
SYMPTOM: Programs won't load
or
execute.
PROBABLE
CAUSES AND REMEDIES:
1.
No AC power.
Be
sure
that
the power cord is plugged in. Check the power
switch
and any
switches
controlling
the wall outlet.
2.
No
video display. Adjust
brightness
control on rear panel.
3. Latch on drive door not turned
to
horizontal position.
4.
Diskette is in drive when
it
is
not
needed.
5.
Diskette in drive isn't the
diskette
expected by the operating program.
6.
Diskette
isn't
in the drive
correctly
(label side
to
the
left
and the
write
-
protect
notch down).
7.
Diskette has been damaged. Try making a copy.
8.
Incorrect response
to
a prompt or invalid menu selection;
check
for error
message from program.
9.
You're asking the program
to
do
something it can't. When all else
fails
, read
your
manual.
74
To Next Page
Loading...
