Kaypro 10 - PERFECT WRITER CONFIGURATION TIPS

PERFECT WRITER CONFIGURATION TIPS
If Perfect Writer is not pri nting properly, you probably need to configure Perfect
Writer
for your printer. To do this:
1. If the KAYPRO is not on, turn it on.
2. If the KAYPRO is on, be sure the current file is saved and closed, according
to the instructions in the manual for the program being used.
3. If you are not in user area 1, type: user 1
4. After the A 1> prompt , type: pfconfig
Press RETURN .
Read
the display and follow the prompts to the master menu.
5.
Choose #2 from the menu by typing: 2
Press RETURN.
6. When the printer menu appears, choose #1. If your printer is listed, you will
use it in the next step.
7. Choose #5 from the pri nter definition menu. The current default printer and
type for console output will be displayed. If your printer was listed in the last
step , enter tha t name. If your printer wasn't listed , enter: PLAIN
(Note: The default printer type, PLAIN, works for most dot - matrix printers ;
the printer type, TELETYPE, works for most letter-qual ity printers).
8. For the name of the type for console output, enter: CONSOLE
9. Then return to the main menu (choose #6) .
10. Lastly , exit the configuration program (choose #6 from the main menu).
One last note: If your printer wasn't listed in step 6, and if the PLAIN,
TELETYPE, or VANILLA printer types don't work for your printer, you will either
have to define a new printer type (#2 on the printer menu) or update an existing
printer definition (#3 on the printer menu), such as PLAIN. You will be asked
several detailed questions concerning your printer if you define a new printer
type, so either have your printer owner's manual handy or ask your dealer for help.
83