KEB COMBIVERT F5

EN - 27
CP-Parameters
35 Set value at AN2 > switching level
40 hardw.curr. limit active
41 modulation on
44 Inverter status > switching level
45 Power stage temperature > switching level
46 Motor temperature > switching level
47 Ramp output value > switching level
48 Apparent current (CP.4) > switching level
49 rot. forward (not at nOP, LS, abnormal stopping or error)
50 rot. reverse (not at nOP, LS, abnormal stopping or error)
63 Absolut ANOUT1 > switching level
64 Absolut ANOUT2 > switching level
65 ANOUT1 > switching level
66 ANOUT2 > switching level
70 Driving current active (safety relay)
73 Absolute active power > switching level
74 Active power > switching level
No listed values are only for application mode.