KEB COMBIVERT F5 Operation Manual

126
Learn Procedure Troubleshooting
Problem: Troubleshoot:
Unable to complete Encoder Pole
Position Learn successfully
Ensure brake picks and the sheave is free to move relatively easily;
should be able to rotate by hand.
If the displayed position does not appear to change and the
sheave does not move back and forth by a few inches, then the
sheave is unable to move freely and the procedure cannot be
complete.
Ensure correct motor U, V, W phasing.

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)