KEB COMBIVERT F5 - Programming Menu

56
Programming Menu
The programming menu is where all manual parameter adjustments are
made and can be accessed at Home > Prog (F3).
The Parameter menu contains the following groups:
• Operator System (OS)
• Basic Setup (US)
• Inputs (LI)
• Motor Data (LM)
• Encoder Data (LE)
• Machine Data (LN)
• Speed Prole (LS)
• Tune Parameters (LL)
• Control Setting (LC)
• Timer Parameters (LT)
• Positioning Parameters (LP)
• Special Functions (LX)
• Conguration Handling (CH)
• Analog I/O (LA)
• Outputs (LO)
• Diagnostic Parameters (DG)
• Field Bus Conguration (FB)
• Terminal Slowdown (TS)
Complete parameter descriptions are listed in Section 6.
Not all parameters may be viewable and changeable, depending on the
password accessibility. Refer to Section 3.8.2 for additional information on
password access.
3.6. Programming
Menu
i