63
Date & Time
The LCD keypad has a real-time clock and stores the date. This allows the
operator to keep time stamps of faults and track total run hours.
The Serial/CAN operator does keep track of the time/date and will do so for
several weeks without power.
The date can be initialized from the home screen by selecting Prog > Setup >
Date. Press enter, scroll to edit the parameter and press enter again to save
the changes.
The date format is mm/dd/yyyy.
The time can be initialized from the home screen by selecting Prog > Setup >
Time. Press enter, scroll to edit the parameter and press enter again to save
the changes.
The time format is 24-hour.
3.8. Date & Time
3.8.1. Setting the date
3.8.2. Setting the time
To Next Page
General
