KEB COMBIVERT F5 Operation Manual

65
Customizing Parameter Lists
LC41 will not be accessible in the User or Basic password Levels
LS02 will be accessible in the OEM password level only.
LS01 will be accessible in all password levels: OEM, Adjuster, User, Basic.
LS01 will read-only in the Basic password level
Once the text le for a custom parameter list has been created, it must be
saved as the following: para_dis.txt.
The para_dis.txt le must then be saved to the keypad operator ash memory.
The text le must be transferred via FTP.
To save the custom parameter list text le to ash, OEM password level is
required. From the Programming Menu, the ‘File’ option (F4) will then be listed.
Under the ‘File’ list, select ‘File Operations’. Under ‘File Operations’ select
FTP’(F2) When the text le has been transferred to the keypad operator ash
memory, select ‘Menu’ (F1), then ‘Prog’ (F1) to return to the Programming Menu.

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)