KEB COMBIVERT F5 Operation Manual

69
Manual Programming
The KEB drive can also be programmed via the mobile lift app. The KEB El-
evator app works connects to the F5 elevator drive via a phone’s bluetooth
connection. Setup, adjustment and troubleshooting of the F5 drive can be
done using the mobile app.
Features
• Real-time diagnostic and troubleshooting dashboard.
• View and adjust parameters.
• Save parameters and email parameter reports.
• View PDF manuals for the F5 drive.
Requirements
The mobile app communicates with the F5 drive through a bluetooth dongle
connected to the drive. Contact the OEM to order the bluetooth dongle to
enable the mobile app.
• Part # 0058060-KT31
More Information
For more information about the mobile app, speak with a KEB elevator engi-
neer at 952-224-1400 or email elevator@kebamerica.com.
4.2.2. KEB Elevator

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)