ELECTRIC BICYCLE METER KT—LCD3 Product User Manual
- 11 -
In display 3, hold button (SW) shortly again to enter display 1.
In each display interface, if you hold button (SW) long, the meter will be
powered-off together with that of the controller.
○ Display of turned on handlebar
Rotate the handlebar under normal operating of the meter, the display interface shows
the sign of turned-on handlebar, see the Figure below. The sign will be off automatically
after about five seconds.
○ Display of power-assist startup
The meter is driving with power-assist under normal operating conditions, the display
interface flashes the power-assist startup sign (ASSIST) as shown in the figure. The sign
will be off automatically after about five seconds.
To Next Page
Loading...