KEC KT-LCD3 - C9 Startup Password Setting Mode

ELECTRIC BICYCLE METER KT—LCD3 Product User Manual
- 28 -
C6 value
Backlight brightness
1
Dimmest
2
Darker
3
Standard
4
Brighter
5
Brightest
After finishing C6 parameter setting, hold button (SW) shortly to save the
current set values and enter C7 parameter setting interface.
○ C7 Cruise Function Setting Mode
Enter C7 parameter setting interface after C6 parameter setting is finished, C7
parameter column flashes.
C7 parameter setting interface
C7 is cruise function setting mode. The setting range is 0 or 1, hold button (UP)
or button (DOWN) shortly for selection.
C7 parameter definition table：
C7 value
Cruise function
0
Off
1
On
After finishing C7 parameter setting, hold button (SW) shortly to save the
current set values and enter C8 parameter setting interface.
○ C8 Motor Operating Temperature Display Mode
Enter C8 parameter setting interface after C7 parameter setting is finished, C8